聯系電話：
010-5601-7676
彩繪膜系列
LED彩光系列
透光膜系列
3D造型系列最新公告：
服務導航
Product categories
您當前位置：首頁>工程動態工程動態
吊頂天花噴繪常識有哪些
發表時間：2016-10-31 09:52:56 發表作者：phpcms 瀏覽次數：
軟膜天花的噴繪常識有哪些
What are the common printing soft film smallpox
軟膜天花的噴繪常識有哪些？下面就跟隨軟膜小編來聊聊吧！
What are the soft film smallpox printing knowledge? Here follow piamater small talk about!
第一，專門為噴繪軟膜而設計制造的噴繪機，不是所有的噴繪機都能?chē)娎L軟膜。
First, for printing film and inkjet printer design and manufacture, not all printer can print film.
第二，軟膜因?yàn)椴缓?jīng)緯線，比較軟、薄，膜的行走速度和噴繪機滾軸的速度常常不一致，產生明顯的“PASS線”。
Second, piamater because of excluding the latitude and longitude lines, soft, thin film, walking speed and printing machine roller speed is often not consistent, have obvious "PASS line".
第三，軟膜材料噴上油墨后會因受腐蝕而變形、鼓起，鼓起部分會和噴頭摩擦，產生破壞性“刮痕”。噴繪畫面色彩越濃，軟膜受腐蝕的程度越大，刮花的情況越常見。
Third, piamater material sprayed ink will be due to corrosion and deformation, and the nozzle part will muster muster, friction, destructive "scratch". Painting color more thick, soft corrosion degree is bigger, scratch the more common.
第四，光面軟膜不適合用于噴繪，一是不吸墨不易晾干；二是畫面很容易被抹掉；三是PASS線明顯。
Fourth, smooth film is not suitable for printing, a holdout is not easy to dry; two pictures are easily wiped out; three is the PASS line obviously.
第五，有些透光軟膜不宜用于噴繪，可能太軟、太薄，或者生產廠家的設備不夠好。噴繪前把軟膜拉出4-5米，平攤在地面，如果兩邊有明顯的“荷葉邊”，這軟膜就不適合用于噴繪。
Fifth, some light is not suitable for soft printing, may be too soft, too thin, or the manufacturer's equipment is not good enough. The film is pulled out 4-5 meters before printing, flat on the ground, if both sides have obvious leaf edge, this film is not suitable for printing.
第六，深藍色或者深灰色畫面，特別容易產生PASS線，原因暫時不明。
Sixth, dark blue or dark gray screen, in particular, is likely to produce PASS line, the reason is unknown.
第七，軟膜伸縮性比較強，噴繪時受到滾軸拉伸變長，噴繪后回縮，加上油墨腐蝕軟化作用，噴繪完成的軟膜實際尺寸一般比現場尺寸要短，因此，軟膜噴繪一定要根據畫面色彩、長度等適當放量。
Seventh, soft film flexibility, by printing roller stretched and printing after retraction, and ink corrosion softening effect, the soft film printing is complete in general than the actual size of the field size should be short, therefore, must be appropriate to put a soft printing amount according to color, length etc..
決定軟膜噴繪質量的因素：
Soft printing quality factors:
一、噴繪文件的精度。接到客戶噴繪文件后，用PS打開文件，放大到1：1（打印尺寸），確保文件精度符合要求，避免不必要的麻煩。
First, the accuracy of printing documents. After receiving the customer printing file, open the file with PS, up to 1:1 (print size), to ensure that documents accuracy meets the requirements, to avoid unnecessary trouble.
二、專業的軟膜噴繪公司。專業軟膜噴繪的要求是1440dpi(每平方英寸的點數）和6PASS，普通噴繪公司對此了解重視不夠，有的公司和操作工為了節省時間和油墨，可能達不到要求，降低軟膜噴繪的質量。往返噴繪公司送材料取材料也是很頭疼的事。
Two, professional film printing company. Professional film printing is 1440dpi (per square inch points) and 6PASS, the ordinary printing company knows enough attention, some companies and operators in order to save time and ink, may not reach the requirements, reduce the quality of film printing. From the printing company to send material material is also a big headache.
三、高精度噴繪機器。軟膜的材料性質和噴繪要求與普通廣告布相差很大，噴頭高度的調節也不盡相同，市面上多數廣告噴繪公司的機器達不到噴繪軟膜的要求，常見的戶外寫真機精度為720dpi。
Three, high precision printing machine. Material properties and printing requirements of piamater and ordinary advertising cloth vary greatly, nozzle height adjustment is not the same, most of the market of advertising printing machine company is not up to the requirements of printing film, outdoor photo machine precision common 720dpi.
四、專業并且有責任心的制圖人員?？蛻?hù)給我們的噴繪文件格式多鐘多樣，制圖人員要能準確轉換成噴繪機可以接受并且不影響噴繪質量的文件。客戶給我們的圖片文件尺寸常常和實際要求的尺寸不完全一致，制圖人員必須有足夠的責任心才能及時發現錯誤并予以糾正，避免出錯。
Four, professional and responsible for the mapping staff. Give us your printing file format clock diversity, drawing personnel to be able to convert the printer can accept and does not affect the quality of printing documents. The size of the image file that the customer gives us is not exactly the same as the size of the actual requirement. The drawing staff must have enough responsibility to find the error in time and correct it.
五、為客戶利益負責的噴繪機操作人員。普通廣告公司的噴繪機操作工通常使用的噴繪材料是有經緯線的廣告布，開機噴繪后就可以去睡覺、看電視、玩游戲等等，而噴繪軟膜必須時刻盯著機器及時調整（有時候需要2-3人同時操作）。否則，我們拿到的噴繪軟膜要么就是PASS線很明顯，要么就是有很多刮花，造成大量的材料浪費。高濃度底色的軟膜天花噴繪，有時候材料浪費可能達到50%以上。
Printing machine operator five, is responsible for the interests of customers. Printing machine operator ordinary advertising company commonly used printing materials are longitudinal advertising cloth, printing after the boot can go to sleep, watch TV, play games and so on, and printing film must keep an eye on the machine (sometimes the need for timely adjustment of 2-3 people at the same time). Otherwise, we get the printing film or PASS line is very obvious, or that there are many scratches, resulting in a large number of waste materials. High concentration color inkjet film, sometimes the material waste could reach more than 50%.